高黏度顆粒充填機
High Viscosity Liquid Filler Feature Introduction
　 　
高黏度顆粒充填機(1) 高黏度顆粒充填機(2) 高黏度顆粒充填機(3)

High Viscosity Liquid Filler Feature Introduction

Type:Piston

1.This filler is classified as Volumetric Fillers and it’sused to fill high viscosityproducts such as oil from the fat,soft cheese,toothpaste and other paste typeproducts.Filling Method is based on piston’sforward and backward motion to producesuction and push out process,product transfers to packaging container’sfillingsection of basic components and this is the flow control valve,which is assembledthrough valve cover,piston and filling tubes.During the filling circulation,piston is moving backward at front position and rawmaterial passes through flow control valve to transmit the cylinder,when pistonreaches the end of the setting,flow control valve rotates to the lower dischargeposition,then piston moves forward and product passes through filling tubes andfill into the container.

2.When operates the machine,scraper’sfilling section of the container uses fixeddistance spiral and star wheel,it separates continuous operating of conveyor,whencontainer reaches to a lower part of filling tube,top bottle plate moves upward,themoving speed of filling tubes is same as the container,at this moment,container isstanding on the support shaft table,this table locates at lower part of filling piston,it surrounds the filler for round movement and filling.

3.Piston’smovement is driven by incline lever on the filling section,the function ofincline lever and cam are similar,it is known as cam track,in the filler of piston’sstroke section,the cam track moves cylinder’spiston upward,the same time 3-wayvalve exchanges through the guide rod,it’sbetter to fill the product into cylinder,when piston reaches to the top section of stroke,3-way valve exchanges to lowerpart position,when valves is at lower part position,piston begins to move down,product enters into the container due to pressure and departs from cylinder.

4.After filling,container are passing through star wheel to a lower part of the fillingsection,then go to the conveyor,containers will move to the next machine to do thenext movements.