|
|
|
|
Introduction
of High Pressure Homogenizer
◆
The
Homogenizer of our company is used 3 horizontal, piston plug via crank
shaft to be driven and the raw material be sucked in.
◆
All
parts contact with raw material are made from stainless steel.
The anti-wear parts are special stainless steel with heat
treatment.
◆
All
stainless steel material of homogenizer are resistance against CIP acid
and caustic cleaning, no corrosion.
◆
The
first stage of homogenizing valve is closing type concentric ring for the
better efficiency of homogenizing.
◆
Pressure
adjusting of the homogenizing valve is used manual control, with sanitary
diaphragm manometer.
◆
All
real and gasket contact with raw material all acid; caustic and heat
resistant also meet the requirement of good sanitary.
◆
Crank
shaft box inside the machine, use lubricant for lubrication and cooling,
also have oil sight-glass, oil refill and exhaust hale.
◆
The
motor is placed on the top of hank shaft box; to reduce the height of
homogenizing head, for easy to maintenance, also increase the suction
capacity.
◆
Transmission
by the oil belt, no use of gear, to reduce the noise and vibration.
◆
With
electric current amp meter, to displace the power current consumption. ◆ All cover with stainless steel plate. |
|
高壓均質機簡介 u 本公司自製之高壓均質機使用3支水平的柱塞，經由曲柄軸驅動，將原物料吸入；原物料經由六組止回閥門後，以150－200BAR的高壓，壓送經過一組二段式的均質閥後，自出口排出。 u本均質機所有與原物料接觸的部份均由不銹鋼製造。其中耐磨耗的部份，皆以特殊不銹鋼經熱處理之後使用。 u本均質機所有不銹鋼材質均能承受CIP的酸鹼清洗，而不腐蝕。 u本機的均質閥第一段為密合式山型同心環，能提高均質效果。 u本均質機均質閥壓力調整採用手動式，附有衛生級的隔膜式壓力計。同時錶面內添加防震油，以延長壓力計的使用壽命。 u本機所有與原物料接觸的所有與原物料接觸的密封環均為耐酸鹼及耐熱且合乎食品衛生條件。 u本機器內部設有曲柄箱，內放置潤滑油以供曲柄軸潤滑及冷卻。並有油面鏡、加油口及排油口。 u本均質機馬達放置於均質機曲柄箱之上，以降低均質頭高度，方便於拆卸維修，並增加入口吸入能力。 u本機的傳動以油皮帶驅動，不以齒輪傳動，可降低噪音及振動。 u本機附電流計，顯示所消耗電流量。 u本機外觀皆以不銹鋼板覆蓋。 |
